When the inside of your drainage pipes is badly compromised-which is usually identified by a CCTV camera inspection-you may wish to have your drains relined. The relining process involves the removal and replacement of the damaged section of the drain, while leaving the original pipe intact.
It’s always a sensible idea to carry out a thorough inspection before you begin work, to make sure that all your drainage pipes are operating correctly. When a pipe is in poor condition, you should ensure that it is not further compromised.
Once you have determined that the plumbing system is up to standard, you will need to determine if the damage is limited to just one or several drainage pipes. If you have only one line of drainage damaged, then you are unlikely to have a problem as such repairs would be expensive. However, if you have several lines of drainage damaged at the same time, then you may wish to have your drains relined as a matter of urgency.
If you know the cause of the damage to your drainage pipes, then the next step is to assess whether the repair can be carried out by yourself or whether you should have a professional to undertake the work. If you are undecided, then you should contact a qualified plumber. If the damage is extensive, then you may even wish to find a qualified plumber who specialises in drainage and pipework as well as who has a good reputation in the business.
A qualified professional plumber should always have the necessary tools on hand. These include high-pressure water heaters, pressure washers, power tools and a drain snake. He may also be equipped with a wide range of other equipment including caulkers and wire stripping tools.
To carry out the process of Melbourne Drain Relining, the professional plumber must first have access to the area where the damage has taken place. He should then remove the existing drain lining from one drain and then move this to the new location so that he can access all the pipes in question. He should ensure that the entire drain lining is removed and that all valves are closed during the process.
Once the pipes have been successfully removed, they are then put back together. All joints are caulked, and caulking cement is applied to all the joints to ensure that the new sealant will adhere.
The drains must be all sealed before any water can flow through them again, to prevent clogging. To achieve this, the pipes are reinstalled using silicone sealant. This is used to avoid water from entering the pipes once they have been reinstalled.
Drain cleaning is only the first stage of Melbourne Drain Relining. When the new seals are applied, the repair team will then re-connect all the faucets and stop the leakages. The plumber should then use a caulking gun to apply pressure to ensure that all the pipes are correctly connected. It will then provide the required water pressure that is needed for the repairs.
If the damage to your pipes is extensive, then the drain sealing may need to be carried out by a further plumber. For this reason, the entire work can be carried out at one time. It can be a rather expensive process as many specialists have experienced engineers who will be able to carry out the work in a cost-effective manner, and so it may be wise to check on the price before hiring them.
It is a good idea to use a professional plumber who has a good reputation and who has performed comparable jobs in the past. They will not only have experience in this field, but they will also know what equipment to use to ensure that the job is done correctly.
It is essential to get professional advice about drain sealing and drain cleaning before undertaking any plumbing works. It will help avoid any issues arising due to substandard work.